| Specifications ¹ |
|---|
| Throat Diameter 25 mm (1 in) |
| Nominal Impedance 8 Ω |
| Minimum Impedance 7.7 Ω |
| Power Handling (2200 –20000 Hz) |
| Nominal 2 40 W |
| Continuous Program 3 80 W |
| Sensitivity (1W/1m) 4 108.5 dB |
| Frequency Range 1.5 – 18 kHz |
| Recommended Crossover5 2.2 kHz |
| Voice Coil Diameter 44 mm (1.7 in) |
| Winding Material Aluminium |
| Inductance 0.11 mH |
| Diaphragm Material Mylar |
| Flux Density 1.7 T |
| Also available in 16 Ω, data upon request |
| Mounting and Shipping Information |
| Two M6 holes 180° on 76 mm (3 in) diameter |
| Three M6 holes 120° on 57 mm (2.2 in) diameter |
| Overall Diameter 134 mm (5.3 in) |
| Depth 60 mm (2.4 in) |
| Net Weight (1 unit) 2.8 kg (6.2 lb) |
| Shipping Weight (4 units) 12.1 kg (26.6 lb) |
| Shipping Box (4 units) 300x160x180 mm (12x6.3x7.1 in) |
| ¹ Driver mounted on B&C ME 45 horn. |
| ² 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. |
| ³ Power on Continuous Program is defined as 3 dB greater than the Nominal rating. |
| 4Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. |
| 512 dB/oct. or higher slope high-pass filte |
B&C DE25 Driver a Compressione 1"
124,44 €
Tasse incluse
Spedito entro 5/7 Giorni
| Specifications ¹ |
|---|
| Throat Diameter 25 mm (1 in) |
| Nominal Impedance 8 Ω |
| Minimum Impedance 7.7 Ω |
| Power Handling (2200 –20000 Hz) |
| Nominal 2 40 W |
| Continuous Program 3 80 W |
| Sensitivity (1W/1m) 4 108.5 dB |
| Frequency Range 1.5 – 18 kHz |
| Recommended Crossover5 2.2 kHz |
| Voice Coil Diameter 44 mm (1.7 in) |
| Winding Material Aluminium |
| Inductance 0.11 mH |
| Diaphragm Material Mylar |
| Flux Density 1.7 T |
| Also available in 16 Ω, data upon request |
| Mounting and Shipping Information |
| Two M6 holes 180° on 76 mm (3 in) diameter |
| Three M6 holes 120° on 57 mm (2.2 in) diameter |
| Overall Diameter 134 mm (5.3 in) |
| Depth 60 mm (2.4 in) |
| Net Weight (1 unit) 2.8 kg (6.2 lb) |
| Shipping Weight (4 units) 12.1 kg (26.6 lb) |
| Shipping Box (4 units) 300x160x180 mm (12x6.3x7.1 in) |
| ¹ Driver mounted on B&C ME 45 horn. |
| ² 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. |
| ³ Power on Continuous Program is defined as 3 dB greater than the Nominal rating. |
| 4Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. |
| 512 dB/oct. or higher slope high-pass filte |
close
| Specifications ¹ |
|---|
| Throat Diameter 25 mm (1 in) |
| Nominal Impedance 8 Ω |
| Minimum Impedance 7.7 Ω |
| Power Handling (2200 –20000 Hz) |
| Nominal 2 40 W |
| Continuous Program 3 80 W |
| Sensitivity (1W/1m) 4 108.5 dB |
| Frequency Range 1.5 – 18 kHz |
| Recommended Crossover5 2.2 kHz |
| Voice Coil Diameter 44 mm (1.7 in) |
| Winding Material Aluminium |
| Inductance 0.11 mH |
| Diaphragm Material Mylar |
| Flux Density 1.7 T |
| Also available in 16 Ω, data upon request |
| Mounting and Shipping Information |
| Two M6 holes 180° on 76 mm (3 in) diameter |
| Three M6 holes 120° on 57 mm (2.2 in) diameter |
| Overall Diameter 134 mm (5.3 in) |
| Depth 60 mm (2.4 in) |
| Net Weight (1 unit) 2.8 kg (6.2 lb) |
| Shipping Weight (4 units) 12.1 kg (26.6 lb) |
| Shipping Box (4 units) 300x160x180 mm (12x6.3x7.1 in) |
| ¹ Driver mounted on B&C ME 45 horn. |
| ² 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. |
| ³ Power on Continuous Program is defined as 3 dB greater than the Nominal rating. |
| 4Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. |
| 512 dB/oct. or higher slope high-pass filte |
DRV0258
Scheda dati
- Pollici
- 1"