| Specifications | |
|---|---|
| Throat Diameter | 50 mm (2 in) |
| Nominal Impedance | 8 ohm |
| Minimum Impedance | 8.3 ohm |
| Nominal Power Handling | 110 W |
| Continuous Power Handling | 220 W |
| Sensitivity (1W/1m) | 107 dB |
| Frequency Range | 0.5 - 18 kHz |
| Recommended Crossover | 0.8 kHz |
| Voice Coil Diameter | 75 mm (3 in) |
| Winding Material | Aluminium |
| Inductance | 0.14 mH |
| Diaphragm Material | Titanium |
| Flux Density | 1.85 T |
| Mounting and Shipping Info Four M6 holes 90° on 102 mm (4 in) diameter |
|
| Overall Diameter | 170 mm (6.7 in) |
| Depth | 64 mm (2.5 in) |
| Net Weight (1 unit) | 4.5 kg (9.9 lb) |
| Shipping Weight (2 units) | 9.6 kg (21.2 lb) |
| Shipping Box (2 units) | 210x210x190 mm (8.3x8.3x7.5 in) |
| 1 Driver mounted on B&C ME75 horn | |
| 2 Also available in 16 ohms, data upon request | |
| 3 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance. |
|
| 4 Power on Continuous Program is defined as 3 dB greater than the nominal rating |
|
| 5 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. | |
| 6 12 dB/oct. or higher slope high-pass filter. | |
B&C DE75PTN
226,92 €
Tasse incluse
Spedito entro 5/7 Giorni
| Specifications | |
|---|---|
| Throat Diameter | 50 mm (2 in) |
| Nominal Impedance | 8 ohm |
| Minimum Impedance | 8.3 ohm |
| Nominal Power Handling | 110 W |
| Continuous Power Handling | 220 W |
| Sensitivity (1W/1m) | 107 dB |
| Frequency Range | 0.5 - 18 kHz |
| Recommended Crossover | 0.8 kHz |
| Voice Coil Diameter | 75 mm (3 in) |
| Winding Material | Aluminium |
| Inductance | 0.14 mH |
| Diaphragm Material | Titanium |
| Flux Density | 1.85 T |
| Mounting and Shipping Info Four M6 holes 90° on 102 mm (4 in) diameter |
|
| Overall Diameter | 170 mm (6.7 in) |
| Depth | 64 mm (2.5 in) |
| Net Weight (1 unit) | 4.5 kg (9.9 lb) |
| Shipping Weight (2 units) | 9.6 kg (21.2 lb) |
| Shipping Box (2 units) | 210x210x190 mm (8.3x8.3x7.5 in) |
| 1 Driver mounted on B&C ME75 horn | |
| 2 Also available in 16 ohms, data upon request | |
| 3 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance. |
|
| 4 Power on Continuous Program is defined as 3 dB greater than the nominal rating |
|
| 5 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. | |
| 6 12 dB/oct. or higher slope high-pass filter. | |
close
| Specifications | |
|---|---|
| Throat Diameter | 50 mm (2 in) |
| Nominal Impedance | 8 ohm |
| Minimum Impedance | 8.3 ohm |
| Nominal Power Handling | 110 W |
| Continuous Power Handling | 220 W |
| Sensitivity (1W/1m) | 107 dB |
| Frequency Range | 0.5 - 18 kHz |
| Recommended Crossover | 0.8 kHz |
| Voice Coil Diameter | 75 mm (3 in) |
| Winding Material | Aluminium |
| Inductance | 0.14 mH |
| Diaphragm Material | Titanium |
| Flux Density | 1.85 T |
| Mounting and Shipping Info Four M6 holes 90° on 102 mm (4 in) diameter |
|
| Overall Diameter | 170 mm (6.7 in) |
| Depth | 64 mm (2.5 in) |
| Net Weight (1 unit) | 4.5 kg (9.9 lb) |
| Shipping Weight (2 units) | 9.6 kg (21.2 lb) |
| Shipping Box (2 units) | 210x210x190 mm (8.3x8.3x7.5 in) |
| 1 Driver mounted on B&C ME75 horn | |
| 2 Also available in 16 ohms, data upon request | |
| 3 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance. |
|
| 4 Power on Continuous Program is defined as 3 dB greater than the nominal rating |
|
| 5 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. | |
| 6 12 dB/oct. or higher slope high-pass filter. | |
DRV075TN8PM
Scheda dati
- Pollici
- 2"